Very simple Audio Amplifier circuit Diagram For Mobile/Laptop

Easy Homemade Audio Amplifier Circuit using Single Mosfet

Spread the love

 

Quick circuit of Audio Amplifier.

Introduction

This is a very simple audio amplifier circuit using a single MOSFET (IRFZ44N), designed for amplifying audio signals from mobile phones, laptops, or other low-power sources. This circuit is an easy DIY solution for beginners interested in building a low-power amplifier that can drive an 8-ohm speaker with a 6V DC power supply.

Circuit Components & Connections

Components Used:

  1. MOSFET Transistor (IRFZ44N) – Acts as the main amplification component.
  2. Resistor (R1 – 20kΩ) – Provides biasing to the MOSFET gate.
  3. Capacitor (C1 – 100μF) – Blocks DC and allows AC (audio signal) to pass through.
  4. Power Supply (6V DC) – Powers the amplifier circuit.
  5. Speaker (8Ω, small size) – Produces amplified audio output.
  6. Audio Input (Mobile/Laptop output) – The audio signal source.

Very simple Audio Amplifier circuit Diagram For Mobile/Laptop

Circuit Explanation & Working

  1. Audio Input Section:

  • The audio signal is fed into the circuit via the input capacitor (C1 – 100μF).
  • The capacitor blocks DC components and allows only AC (audio signal) to pass, preventing unwanted noise.
  1. MOSFET Amplification Stage:

  • The IRFZ44N MOSFET is used as an audio signal amplifier.
  • R1 (20kΩ resistor) biases the MOSFET’s Gate (G) to ensure proper switching operation.
  • The Source (S) of the MOSFET is connected to ground (GND).
  • The Drain (D) is connected to the positive terminal of the speaker and then to VCC (6V DC).
  1. Output Stage (Speaker Connection):

  • The amplified output signal is sent to the 8Ω speaker, producing an amplified version of the input audio signal.
  • The MOSFET acts as a current amplifier, allowing the weak input signal to drive the speaker effectively.

Features of this Single MOSFET Audio Amplifier

  • Simple & Easy-to-Build: Requires very few components, making it ideal for beginners.
  • Operates on Low Voltage (6V DC): Suitable for battery-powered applications.
  • Compatible with Mobile/Laptop Audio Sources: Works well with any low-level audio output.
  • Compact & Efficient: Single MOSFET design ensures efficiency and small circuit size.
  • Drives an 8Ω Speaker: Provides sufficient audio amplification for small-scale applications.

Applications

✔ DIY Audio Projects
✔ Small Portable Speaker Systems
✔ Mobile & Laptop Audio Amplifiers
✔ Educational Electronics Projects

Best SEO Keywords for Optimization

  1. Single MOSFET Audio Amplifier Circuit
  2. DIY Simple Audio Amplifier Using MOSFET
  3. MOSFET IRFZ44N Audio Amplifier Design
  4. Low Power Audio Amplifier for Mobile & Laptop
  5. Easy Homemade Audio Amplifier Circuit

Also Read

Stereo Audio Amplifier Circuit Using CD6283

Switch ON Time Delay Timer


Spread the love

1 thought on “Easy Homemade Audio Amplifier Circuit using Single Mosfet”

  1. Hello Aman bharti. thanks this circuit.
    and I have some questions.

    I try to make two stage mosfet amplifier audio amp. and I change your circuit.

    How do I connect if I want to add CD AMP here?

Leave a Comment

Your email address will not be published. Required fields are marked *